High Temperature Immersion Sensor R S B Platinum Rhodium Type Ceramic Probe Thermocouple

High Temperature Immersion Sensor R S B Platinum Rhodium Type Ceramic Probe Thermocouple

Specification:

1.S type thermocouple
2.Tempe.range:0~1600C/1800C
3.probe size:25*1350mm
4.Protectiontube:Corundum&310S
5.ISO9001-2008/CE

Information
Type S thermocouples are constructed using one wire of 90% Platinum and 10% Rhodium (the positive or "+" wire) and a second wire of 100% platinum (the negative or "-" wire). Like type R, type S thermocouples are used up to 1600 °C. In particular, type S is used as the standard of calibration for the melting point of gold (1064.43 °C).

Type B thermocouples use a platinum–rhodium alloy for each conductor. One conductor contains 30% rhodium while the other conductor contains 6% rhodium. These thermocouples are suited for use at up to 1800 °C. Type B thermocouples produce the same output at 0 °C and 42 °C, limiting their use below about 50 °C.

WR Serial thermocouple

1. Graduation mark : N/K/E/J/T/S/R/B
2. Thermocouple pair No.
   1. Single No.
3. Setting device
   1. Non-fixed setting device
4. Cold junction form
   1. Easy type
   2. Anti-splash terminal block type(may be replaced by water-proof type)
   3. Water-proof terminal block type
5. Outer protection tube materials
   1. Diameter 16mm outer protection tube
6. Outer protection tube materials
   1. T1 High alumina (admantine spar) porcelain outer protection tube

temperature sensor rtd

temperature sensor rtd pt100

High Temperature Immersion Sensor R S B Platinum Rhodium Type Ceramic Probe Thermocouple Images